Support and Ballast Slabs

АОП

Details
Hits: 2285
АОП

Standard Series N0268-1, GOST 22131-76
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
D h
1 АОП 750 80 0,040 B25
Used to extend supporting area and fix soft in-ground reinforced concrete power transmission supports.

П-3и, П-4

Details
Hits: 1757
П-3и

Standard Series 3.407.1-143, GOST 13015-2003
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
D h
1 П-3и 620 150 0,050 В25
2 П-4 420 150 0,020 В25
Used to fix in-ground metal and reinforced concrete 6-10 kV power transmission supports.

ОП-1

Details
Hits: 2280
ОП-1

Standard Series 3.407-115, GOST 13015-2003
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
L b h
1 ОП-1 1600 920 500 0,620 В22,5
Used to fix in-ground СК and СЦ stands in case when due to huge pressure loads and soft ground it is necessary to extend bearing capacity of the stand.

П3-Р

Details
Hits: 1692
П3-Р

Renovation of Foundation Structures according to 3.407-115 Series, GOST 13015-2003
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
L b h t
1 П3-Р 3600 200 1600 700 0,700 B15
Reinforced concrete ballast slab used to increase bearing capacity of the foundation affected by horizontal loads (collapsing forces). Due to the regulatory information П3-Р slabs are complete equivalents of the П3 slab.

РХ-1

Details
Hits: 1832
РХ-1

КЖ.И-РХ-1 Electrosetproekt, Almaty, 2005, GOST 13015-2003
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
L b h
1 РХ-1 500 300 80 0,012 B25
Designed to be used as a cross-bar to construct 10 kV overhead power transmission lines.

УБ-1

Details
Hits: 1953
УБ-1

Standard Series 3.407-102, GOST 13015-2003
№ Product
Name		 Dimensions, mm Amount of
concrete, m3		 Concrete
Grade
L b h
1 УБ-1 800 520 400 0,120 B15
Used with standard reinforced concrete УСО stands. The УБ-1 foundation is installed in the ground and functions as the foundation for power stands allowing construction of substations, open distribution devices and structures with optional electro technical equipment in heavy environments, because the surface area of their foot that touches the ground is bigger then the surface of a stand, besides bearing load of stands is evenly distributed on the ground.