Cone Supports

СК 16

СК 16

GOST 22687.0-85, drawings №3693-25

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L D1 D2 D3 D4
1 СК 16. 1-1.3 16400 300 410 450 560 8 100, 1000х7 1,317 В40
2 СК 16. 1-3.3 16400 300 410 450 560 8 100, 1000х7 1,317 В40

Cone shaped, reinforced concrete supports, pre-stressed, manufactured using centrifuge method for 35 kV overhead power transmission towers. CK16 supports are manufactured and delivered in a set with П 1 footstep pillow. This type of support is recommended for use in corrosive environments.

СК 16сб

СК 16сб

СТ ТОО 39065464-032-2010

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L L1 D1 D2 D3 D4
1 СК 16. 1-1.3сб 16400 8200 300 410 450 560 8 100, 1000х7 1,447 В40
2 СК 16. 1-3.3сб 16400 8200 300 410 450 560 8 100, 1000х7 1,447 В40

Cone shaped, reinforced concrete supports, pre-stressed, made from spun concrete for 35 kV overhead power transmission towers. Supports are designed for use in difficult access areas. A support is divided into two parts which are connected with a metal flange. Flange connections are robust similar to a one piece product. Built-up, made from spun concrete, reinforced concrete supports meet all the requirements applicable to one-piece support specified in state regulatory documentation. To avoid corrosion, all non-concrete metal parts are covered with anti-corrosive paint using hot or cold dip technology. Standard sets of built-up supports include base sections, П 1 footstep pillow, as well as metalware to assemble a whole unit.

СК 22

СК 22

Standard Series 3.407.1-175, 13104тм, 3.407.1-151, 3.407.1-152, 13247 тм, GOST 22687.0-85

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L D1 D2 D3 D4
1 СК 22.1-1.3 22600 330 440 540 650 10 100, 1000х9 1,917 B40
2 СК 22.1-2.3 22600 330 440 540 650 8 100, 1000х7 1,917 B40
3 СК 22.1-3.3 22600 330 440 540 650 10 100, 1000х9 1,917 B40
4 СК 22.2-1.3 22600 310 440 490 650 9 300, 1000х6, 2000х4 2,317 B40
5 СК 22.3-1.3 22600 310 440 510 650 6 200,2500, 2000х4 2,217 B40
6 СК 22.3-2.3 22600 310 440 510 650 8 200,1500х1,
1000х1,2000х1, 1000х2, 2000х2
2,217 B40
7 СК 22.4-1.3 22600 340 440 540 650 11 100,1000х2
500х6,1000х2
1,827 B40
8 СК 22.4-2.3 22600 340 440 540 650 18 100, 500х17 1,827 B40
9 СК 22.4-3.3 22600 340 440 540 650 16 100,1000х1,
500х5,1000х1,
500х3
1,827 B40

Cone shaped, reinforced concrete supports, pre-stressed, manufactured using centrifuge method for 35-750 kV overhead power transmission towers. CK22 supports are manufactured and delivered in a set with П 2 footstep pillow. This type of support is recommended for use in corrosive environments.

СК 22сб

СК 22сб

СТ ТОО 39065464-032-2010

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L L1 D1 D2 D3 D4
1 СК 22.1-1.3сб 22600 11300 330 440 540 650 10 100, 1000х9 2,047 B40
2 СК 22.1-2.3сб 22600 11300 330 440 540 650 8 100, 1000х7 2.045 B40
3 СК 22.1-3.3сб 22600 11300 330 440 540 650 10 100, 1000х9 1,917 B40
4 СК 22.2-1.3сб 22600 11300 310 440 490 650 9 300, 1000х6, 2000х4 2,047 B40
5 СК 22.3-1.3сб 22600 11300 310 440 510 650 6 200,2500, 2000х4 2,447 B40
6 СК 22.3-2.3сб 22600 11300 310 440 510 650 8 200,1500х1,
1000х1,2000х1, 1000х2, 2000х2
2,317 B40
7 СК 22.4-1.3сб 22600 11300 340 440 540 650 11 100,1000х2
500х6,1000х2
1,827 B40
8 СК 22.4-2.3сб 22600 11300 340 440 540 650 18 100, 500х17 1,957 B40
9 СК 22.4-3.3сб 22600 11300 340 440 540 650 16 100,1000х1,
500х5,1000х1,
500х3
1,957 B40

Cone shaped, reinforced concrete supports, pre-stressed, made from spun concrete for 35-750 kV overhead power transmission towers. Supports are designed for use in difficult access areas. A support is divided into two parts which are connected with a metal flange. Flange connections are robust similar to a one piece product. Built-up, made from spun concrete, reinforced concrete supports meet all the requirements applicable to one-piece support specified in state regulatory documentation. To avoid corrosion, all non-concrete metal parts are covered with anti-corrosive paint using hot or cold dip technology. Standard sets of built-up supports include base sections, П 2 footstep pillow, as well as metalware to assemble a whole unit.

СК 26

СК 26

GOST 22687-85, 1304тм, 13247 тм, 3.407.1-152, 3.407.1-167, 3.407.1-175

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L D1 D2 D3 D4
1 СК 26. 1-1.3 26000 300 410 500 650 12 200, 1000х6,
500х2,1000х2,10300
2,517 В40
2 СК 26. 1-2.3 26000 300 410 500 650 7 200, 1000
2000х2,1500х2,11300
2,517 В40
3 СК 26. 1-3.3 26000 300 410 500 650 8 200, 1000, 2000, 500х2, 1000х3 2,517 В40
4 СК 26. 1-6.3 26000 300 410 500 650 12 200, 1000х6, 500х2, 1000х2, 10300 2,517 В40
5 СК 26. 2-1.3 26000 280 410 504 650 7 200, 1000х2, 1500х2, 1000х2 2,517 В40
6 СК 26. 3-2.3 26000 310 410 520 650 7 200, 1000, 4х500, 2000, 1000, 4х500 2,167 В40

Cone shaped, reinforced concrete supports, pre-stressed, manufactured using centrifuge method for 35-750 kV overhead power transmission towers. CK26 supports are manufactured and delivered in a set with П 2 footstep pillow. This type of support is recommended for use in the corrosive environments.

СК 26сб

СК 26сб

СТ ТОО 39065464-032-2010

Product
Name
Dimensions, mm n, pcs. Distance from the top, mm Amount
of concrete, m 3
Concrete
Grade
L L1 D1 D2 D3 D4
1 СК 26. 1-1.3сб 26000 11300 300 410 500 650 12 200, 1000х6,
500х2,1000х2,10300
2,647 В40
2 СК 26. 1-2.3сб 26000 11300 300 410 500 650 7 200, 1000
2000х2,1500х2,11300
2,647 В40
3 СК 26. 1-3.3сб 26000 11300 300 410 500 650 8 200, 1000, 2000, 500х2, 1000х3 2,647 В40
4 СК 26. 1-6.3сб 26000 11300 300 410 500 650 12 200, 1000х6, 500х2, 1000х2, 10300 2,647 В40
5 СК 26. 2-1.3сб 26000 11300 280 410 504 650 7 200, 1000х2, 1500х2, 1000х2 2,647 В40
6 СК 26. 3-2.3сб 26000 11300 310 410 520 650 7 200, 1000, 4х500, 2000, 1000, 4х500 2,297 В40

Cone shaped, reinforced concrete supports, pre-stressed, made from spun concrete for 35-750 kV overhead power transmission towers. Supports are designed for use in difficult access areas. A support is divided into two parts which are connected with a metal flange. Flange connections are robust similar to a one piece product. Built-up, made from spun concrete, reinforced concrete supports meet all the requirements applicable to one-piece support specified in state regulatory documentation. To avoid corrosion, all non-concrete metal parts are covered with anti-corrosive paint using hot or cold dip technology. Standard sets of built-up supports include base sections, П 2 footstep pillow, as well as metalware to assemble a whole unit.